
The simplest positioner, and the one most often mis-specified
A floor table positioner is a rotating table mounted on a fixed base at working height. It has no tilt and no lift: the workpiece is clamped to the table, the table turns, and the weld is made from above. That is all it does, and for a large class of work it is exactly enough — a flat plate, a tank bottom, a dished end, a ring, a flange assembly or a fabricated panel that needs to be rotated past a fixed torch or an operator.
The FT3 is that machine in the BIQEE positioner range: a floor-level turntable sized for tank and part welding, with a variable-speed drive and a table drilled or slotted for clamping.

What a floor table can and cannot do
| Task | Floor table (FT3) | Tilting table (WP class) |
|---|---|---|
| Rotate a flat workpiece under a torch | Yes — its whole purpose | Yes, with the table horizontal |
| Present a vertical face for welding | No | Yes — tilt axis up to and beyond 90° |
| Weld the inside of a dished end | Yes, if the table is loaded with the concave side up | Yes |
| Reach a nozzle or branch at an angle | Only by rotating the table | Yes — tilt plus rotation |
| Load by crane from above | Easy — nothing in the way | Requires clearance for the tilt mechanism |
| Relative cost for a given capacity | Lower | Higher |
The failure mode is a shop buying a floor table for tank bottom work and then discovering that the nozzle and manway welds need a vertical face. The honest answer is to list the joints first and choose the machine from the joint list — a tilting machine costs more, but buying a floor table and then a tilting machine costs more still.
Rotation accuracy under a large workpiece
A tank bottom four metres across that is one millimetre out of flat presents as a height change of a couple of millimetres at the table edge as it turns — more than enough to change the arc on a TIG root. Two things control this: table flatness and machining after assembly (not before), and the stiffness of the table support bearing. A slewing ring sized for the load, rather than a simple centre pin, is what keeps a large table flat under a heavy off-centre workpiece.
Holding the workpiece
Floor tables are usually supplied with T-slots or a drilled and tapped grid. Clamping a 3 m tank bottom at four points lets the plate flex between clamps as it rotates, so the weld gap changes. Radial clamping closer to the seam, or a set of adjustable supports under the plate, holds it flat. On thin plate, magnetic clamps and strongbacks are commonly used along the seam in addition to the table clamps.

Where floor tables are the right choice
- Tank bottoms and shell courses — rotation for circumferential and radial seams in flat position.
- Dished ends and heads — internal and external welding with the workpiece turned under the torch.
- Flanges and rings — circumferential welds on large diameter rings.
- Panels and plate assemblies — fabricated flat parts that need to be rotated between passes.
- Robot cells — a floor table is a common single-axis positioner under a robot for flat parts.
Specifying an FT3
To configure a floor table positioner we need: maximum workpiece diameter and weight, table diameter required, whether the load is centred or can be off-centre (and by how much), rotation speed range and the drive accuracy needed for the welding process, table top arrangement (T-slots or tapped grid), the working height the operator needs, and the shop power supply. Positioners in the range cover 0.5 t to 100 t with table diameters from 600 mm to 5,000 mm.
Minimum order quantity is 1 set. Standard machines ship in 30–50 days after deposit; custom tables and fixtures are scheduled in the technical proposal. Payment terms are T/T; trade terms are FOB, FCA or CIF. Core ranges are CE compliant with a certificate of compliance supplied.
DESAN ELECTRIC LTD supplies positioners under the BIQEE brand, turning rolls under DESAN, and combination welding machines under ZAULUX. Every enquiry, quotation and contract is handled by DESAN ELECTRIC LTD, which has served 1,000+ customers in 20+ countries over 20+ years, with engineering on welding equipment since 1997.